Seamless Pure Calcium Cored Wire For Steel Deoxidizer
Product Description
Alcium Cored Wire is an improved material for the defects of traditional calcium treatment methods (such as direct input of metal calcium blocks). Traditional calcium blocks are easy to float and burn because their density is lower than that of molten steel (calcium density is 1.55g/cm³, while molten steel is about 7.0g/cm³), and the calcium utilization rate is only 10%-20%; while calcium cored wire is wrapped in steel strips and penetrates into the molten steel. The calcium powder is quickly released at high temperature and fully reacts with the molten steel, and the utilization rate is increased to 30%-50%. The amount of calcium added can be accurately controlled by the wire feeding speed (error ≤0.005%), which is an efficient process carrier for precise control of molten steel composition.
Products application
1. Molten steel refining: Calcium is a strong deoxidizing element. It reacts with oxygen in molten steel to form CaO (calcium oxide), which can effectively reduce the oxygen content in steel (usually from more than 50ppm to less than 20ppm). Compared with the problem of Al₂O₃ hard inclusions easily remaining in traditional aluminum deoxidation, calcium deoxidation can reduce the damage of oxides to steel performance. It is especially suitable for bearing steel, gear steel and other steels with extremely high purity requirements, and can significantly improve the fatigue life of steel (for example, after calcium treatment, the probability of early failure of bearing steel is reduced by more than 40%).
2. Improve the mechanical properties of steel: The original Al₂O₃, MnS and other inclusions in the molten steel are mostly angular or long strips, which will lead to a decrease in the mechanical properties of steel (such as toughness and ductility) and easily cause stress concentration. The calcium in the calcium cored wire can react with these inclusions to generate spherical or short rod-shaped low-melting-point composite inclusions (such as calcium aluminate, calcium sulfide).
3. Prevent nozzle blockage: During the continuous casting process of aluminum-deoxidized steel (such as low-carbon aluminum-killed steel and silicon steel), high-melting-point Al2O2 particles are easily deposited on the inner wall of the nozzle, causing casting interruption and affecting production continuity. The calcium in the calcium-coated wire can react with Al2O2 to generate low-melting-point 12CaO・7Al2O2 (melting point of about 1450℃), which is discharged with the flow of molten steel.
Products Photos

Company Profile:
|
Henan Tieyao Trading Co., Ltd. has always adhered to the corporate culture of "people-oriented, scientific management, civilized and harmonious, and pursuit of excellence". With the spirit of active learning, diligent thinking, courageous practice, and good at summarizing, it strives to improve its own quality, promote professional management, and put corporate development first.
|
FAQ
Q1:How do you ensure the quality of your products?
A1: Yes, when we get your inquiries, not only we will evaluate the more competitive price, but also we can get the most reasonable delivery time. So the prompt delivery can be guaranteed.
Q2: What is the shipping cost?
A2: The shipping cost is determined by the destination port, weight, packing size, total CBM of the products, we will try best to get the most reasonable shipping cost from the forwarders or express couriers to help you save more money.
Hot Tags: seamless pure calcium cored wire for steel deoxidizer, China seamless pure calcium cored wire for steel deoxidizer manufacturers, suppliers, factory, welding product receipt, welding product return, welding product warranty
You Might Also Like
Send Inquiry








