430 Stainless Steel Coil in Stock

430 stainless steel is a non-hardenable steel containing straight chromium, belonging to the ferritic group of steels. This steel offers good corrosion resistance and formability, coupled with practical mechanical properties.430 stainless steel coils offer a balanced combination of corrosion resistance, formability, and cost-effectiveness. They are suitable for a wide range of applications, from kitchen appliances to automotive trim and industrial equipment. With various processing and customization options, 430 stainless steel coils can meet the specific needs of different industries and applications.

 

 

 

STANDARD	UNS	JIS	WERKSTOFF NR.	AFNOR	BS	GOST	EN
SS 430	S43000	SUS 430	1.4016	–	–	–	–

 

C	Si	Mn	Cr	Ni	S	P	N
≤0.12	≤1.0	≤1.0	16.0～18.0	< 0.75	≤0.03	≤0.04	≤0.1

 

 

Tensile strength	Yield Strength	Elongation (%)	Hardness	Reduction of Area ψ (%)	Density	Melting point
> 450 Mpa	>205 Mpa	> 22%	< HRB89	≥50	7.7g / cm3	1427° C

 

 

Cold Working:

430 stainless steel can be readily cold worked to achieve various shapes and mechanical properties.

Cold working increases strength and hardness but reduces ductility.

Heat Treatment:

Annealing: Annealing at 800-900°C (1472-1652°F) followed by air cooling restores ductility and relieves internal stresses.

Stabilizing Treatment: Heat treating at 815-870°C (1499-1598°F) helps to stabilize the microstructure and improve corrosion resistance.

Machining:

430 stainless steel is easier to machine than many other stainless steels.

Proper cutting tools and techniques are required to avoid work hardening and tool wear.

 

 

 

Slitting:

Coils can be slit into narrower widths as required.

Slitting tolerances are typically very tight, ensuring precision and consistency.

Cut-to-Length:

Coils can be cut into sheets or lengths based on specific dimensions.

This customization allows for easier handling and processing in various applications.

Surface Treatment:

Pickling and Passivation: Removes surface contaminants and enhances corrosion resistance.

Coating: Various coatings can be applied to improve surface properties, such as anti-fingerprint or anti-corrosion coatings.

Edge Conditioning:

Deburring: Removes sharp edges and burrs, improving safety and handling.

Edge Rounding: Provides smoother edges for applications where sharp edges are undesirable.

Hot Tags: 430 stainless steel coil in stock, China 430 stainless steel coil in stock manufacturers, suppliers, factory, stainless steel bar, 201 stainless steel sheet, 304 stainless steel welded pipe, 201 stainless steel coil, 430 stainless steel sheet, flanges