Ferrosilicon Ferro Silicon 65 75 Fesi75 Ferroalloy
video

Ferrosilicon Ferro Silicon 65 75 Fesi75 Ferroalloy

The silicon content of ferrosilicon is generally between 15% and 90%, and the common specifications are 45%, 65%, 72% and 75% ferrosilicon. Depending on the silicon content, the properties and uses of ferrosilicon will vary.
Send Inquiry
Product Introduction

Ferrosilicon is made of coke, steel chips (oxide sheet), quartz (or silica) as raw materials by electric furnace smelting. It is an important auxiliary material for cast iron and steelmaking, which is used to deoxidize and adjust the chemical composition of steel.

 

Product introduction

Scientific name: ferrosilicon
Models: 65#, 72#, 75#
Ferrosilicon 75# -- (1) National standard 75# refers to the actual silicon ≥72%; (2) Hard 75 ferrosilicon refers to the actual silicon ≥75%;
Ferrosilicon 65# means that the silicon content is more than 65%;
Low aluminum ferrosilicon: usually refers to the aluminum content of ferrosilicon below 1.0. According to different requirements of customers, it can reach 0.5, 0.2, 0.1 and so on
State: natural block, thickness of about 100mm. (Whether there are cracks in the appearance, whether it is faded by hand, whether the knocking sound is crisp, whether the thickness of the cross-section is gray and white, with porosity)
Packing: Bulk or ton bag packing.
Note: Iron silicon is afraid of tide, natural block is easy to powder when it meets water, and the silicon content will decrease.

 

product-516-439product-516-439

Application field

 

(1) Used as deoxidizer and alloying agent in steelmaking industry. In order to obtain the chemical composition of qualified steel and ensure the quality of steel, in the later stage of steelmaking must be deoxidized, the chemical affinity between silicon and oxygen is very large, so ferrosilicon is a strong deoxidizer for precipitation and diffusion in steelmaking. Adding a certain amount of silicon to steel can significantly improve the strength, hardness and elasticity of steel, so when smelting structural steel (containing silicon 0.40-1.75%), tool steel (including SiO.30-1.8%), spring steel (including SiO.40-2.8%) and transformer silicon steel (containing silicon 2.81-4.8%), Ferrosilicon is also used as an alloying agent. In addition, in the steelmaking industry, the use of ferrosilicon powder at high temperature can release a lot of heat, which is often used as ingot cap heating agent to improve the quality and recovery of ingot.

(2) Used as inoculant and nodulator in the cast iron industry. Cast iron is an important metal material in modern industry, it is cheaper than steel, easy to melt smelting, has excellent casting performance and much better than steel shock capacity, especially ductile iron, its mechanical properties reach or close to the mechanical properties of steel. Adding a certain amount of ferrosilicon to cast iron can prevent the formation of carbides in iron and promote the precipitation and spheroidization of graphite, so in the production of ductile iron, ferrosilicon is an important inoculant (to help precipitate graphite) and spheroidizing agent.

 

product-529-480product-502-450

(3) Used as a reducing agent in the production of ferroalloys. Not only the chemical affinity between silicon and oxygen is very large, but also the carbon content of high-silicon iron silicon is very low. Therefore, high-silicon ferrosilicon (or siliceous alloy) is a commonly used reducing agent in the ferroalloy industry when producing low-carbon ferroalloys.

(4) For other purposes. The fine or atomized ferrosilicon powder can be used as a suspended phase in the mineral processing industry. In the welding rod manufacturing industry can be used as welding rod coating. High silicon iron silicon is used in the chemical industry to make products such as silicone.

Among these uses, the steelmaking industry, the casting industry and the ferroalloy industry are users of ferrosilicon. Together, they consume more than 90% of the ferrosilicon. In a variety of different grades of ferrosilicon, the most widely used is 75% ferrosilicon. In the steelmaking industry, about 3-5kG 75% of ferrosilicon is consumed per 1t of steel produced.

Hot Tags: ferrosilicon ferro silicon 65 75 fesi75 ferroalloy, China ferrosilicon ferro silicon 65 75 fesi75 ferroalloy manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry